+
Steg 1: Välj produkter
Lägg till din första produkt för att börja med

Steg 2: Invänta offerter

Vi samlar in återförsäljarnas förslag, tar normalt 1-2 timmar.

Steg 3: Välj offert

Välj den återförsäljare som ger er bäst pris och villkor utifrån ert behov.

Logga in för att skapa din jämförelse

Logga in

Skicka, granska och välj offerter samt kontakta återförsäljare genom ditt konto.

Logga in för att skapa din favoritlista

Logga in

Skicka, granska och välj offerter samt kontakta återförsäljare genom ditt konto.

Produkter
Produkter Server & lagring Gränssnittskomponenter Konverterare/Repeaters/Isolatorer Moxa ICF-1150-S-ST serial converter/repeater/isolator RS-232

Moxa ICF-1150-S-ST serial converter/repeater/isolator RS-232 Fiber (ST)

Moxa
Tillv.art.nr ICF-1150-S-ST

Kan beställas
Favorit
Jämför
Beskrivning Specifikationer

Produktbeskrivning

Moxa ICF-1150-S-ST. Dimensions (WxDxH): 30.3 x 70 x 115 mm. Input voltage: 12 - 48 V, Power consumption: 163 mA. Certification: UL, CE, FCC, ATEX, UL/cUL

Three-Way Communication

The ICF-1150 series support 2 serial ports, with a D-sub connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data out through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer's serial port to the RS-485 bus.

Rotary Switch for Setting the Pull High/Low Resistor

The RS-485 interface supports multi-drop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN-rail.

Warranty: 5 years

Specifikationer

Host interface
RS-232
Output interface
Fiber (ST)
RS-422 signals
RxD+
RxD-
SGND
TxD+
TxD-
RS-485 signals
RxD+
RxD-
SGND
TxD+
TxD-
Baud rate
921.6
Operating temperature (T-T)
0 - 60
Storage temperature (T-T)
-40 - 85
Operating relative humidity (H-H)
5 - 95
Input voltage
12 - 48
Certification
UL
CE
FCC
ATEX
UL/cUL
Electrostatic Discharge (ESD) protection
15
Dimensions (WxDxH)
30.3 x 70 x 115
Power consumption
163
Over current protection
Ja
Mounting
DIN-rail
Wavelength
1310
RX sensitivity
-25
TX output
-5
LED indicators
Ja
Fiber optic connector
ST
Transmission distance (single-mode)
40