+
Steg 1: Välj produkter
Lägg till din första produkt för att börja med

Steg 2: Invänta offerter

Vi samlar in återförsäljarnas förslag, tar normalt 1-2 timmar.

Steg 3: Välj offert

Välj den återförsäljare som ger er bäst pris och villkor utifrån ert behov.

Logga in för att skapa din jämförelse

Logga in

Skicka, granska och välj offerter samt kontakta återförsäljare genom ditt konto.

Logga in för att skapa din favoritlista

Logga in

Skicka, granska och välj offerter samt kontakta återförsäljare genom ditt konto.

Produkter
Produkter Skrivare & MFP Tillbehör Utskriftstillbehör Material För 3D-Utskrifter Gearlab GLB251011 3D printing material

Gearlab GLB251011 3D printing material Polylactic acid (PLA) Magenta 1 kg

eSTUFF
Tillv.art.nr GLB251011

+5
Favorit
Jämför
Beskrivning Specifikationer Dokument (1)

Produktbeskrivning

Gearlab GLB251011. Printing material: Polylactic acid (PLA), Printing colours: Magenta, Print speed: 90 mm/sec. Weight: 1 kg, Thickness: 1.75 mm, Diameter: 1.75 mm. Quantity per pack: 1 pc(s), Package width: 213 mm, Package depth: 212 mm

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.

Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.

Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.

With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.

Specifikationer

Printing material
Polylactic acid (PLA)
Printing colours
Magenta
Weight
1000
Thickness
1.75
Diameter
1.75
Wire length
34000
Quantity per pack
1
Glass transition temperature (min)
125
Package weight
1312
Print speed
90
Impact strength
3
Flexural modulus
2300
Flexural strength
60
Elongation at break
3
Diameter tolerance
0.05
Tensile strength
500
Print temperature guideline
220
Non-toxic
Ja
Package width
213
Package depth
212
Package height
75

Dokument (1)